D-Link Out Door Bridge

Standard
IEEE 802.11b Direct Sequence Spread Spectrum (DSSS)
Interfaces
- 10BASE-T Ethernet port for WAN to LAN
connection
- UART for console port
Frequency Range
2.4 - 2.497MHz ISM band
Data Rage & Modulation-11Mbps (CCK)
- 5.5Mbps (CCK)
- 2Mbps (DQPSK)
- 1Mbps (DBPSK)
Receiver Sensitivity
- < -84dBm @11Mbps
- < -90dBm @2Mbps
Transmit Output Power (excluding external antenna)
- 20dBm (100mW typically) (EU frequency)
- 23dBm (200mW typically) (North America frequency)
RF Connector
Proprietary N-type (Reverse Polarity)
Operating Range (FCC)
Up to 3.48miles (5.6Km)
Protocols Supported
- TCP/IP
- NAT/NAPT
- Virtual Server (NAT inbound server)
- DHCP client/server
- PPPoE
- Static Routing
- Ethernet to Wireless Bridging
Security
- 64/128-bit WEP (RC4)
- MAC address based access control
- 802.11b SSID hidden
- Denial Wireless 802.11b "ANY" station
- PPPoE authentication PAP/CHAP
Firewall
- Built-in NAT firewall
- IP based access control
- Denial of Service (DoS) protection
Device Management
- Web-based manager
- Console (RS-232) configuration
- SNMP MIB-I & MIB-II
Firmware Upgrade
- TFTP (Transparent FTP)
- Xmodem & 1K Xmodem
Lightning Protector Surge Current
20KA
Power Supply (PoE)
- Input: 100 ~ 240V AC 50 ~ 60Hz
- Output: -48V DC 0.7A
Operating Temperature
ooo o
-20 ~ 70 C (-4 ~ 158 F)
Storage Temperature
o o o o
-40 ~ 80 C (-40 ~ 176 F)
Humidity (non-condensing)
- 5% to 95% typical
Dimensions
243 (L) x 200 (W) x 77 (H) mm
(9.57 x 7.87 x 3.03 inches)