- Reviews (0)
- Specification
- Download
Only logged in customers who have purchased this product may leave a review.
EnGenius ECB300 Specs
| RF Frequency Range | 2.4 GHz frequency band |
| Standard | IEEE 802.11b/g: 2.400 to 2.484 GHz |
| Data Rate | Up to 300 Mb/s |
| Memory | Memory: 32 MB Flash Memory: 4 MB |
| Power Consumption | Up to 9 W |
| Antenna | 2 external 5 dBi omni-directional SMA antennas (diversity support) |
| Physical Interfaces | 1 x RJ-45 Fast Ethernet (10/100 Mb/s) 1 x Reset Button Power Jack |
| LED Status Indicator | Power LAN (10/100 Mb/s) WLAN (wireless connection) |
| Power Requirements | Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz (depends on different countries) Active Ethernet (Power-over-Ethernet, IEEE 802.3af) Power Adapter (United States) 48 VDC/0.375 A Device: 12 V/1 A |
| Modulation | OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK |
| Channels | Operating 2.4 GHz: US/Canada 1 to 11 |
| Receiver Sensitivity | 802.11b (2.412 to 2.472 GHz) best ≤-98 dBm 802.11g (2.412 to 2.472 GHz) best ≤-93 dBm 802.11n (2.412 to 2.472 GHz) best ≤-93 dBm |
| Transmit Power | 802.11b (2.412 to 2.472 GHz): 29 dBm @ 1 to 11 Mb/s 802.11g (2.412 to 2.472 GHz): 802.11n (2.412 to 2.472 GHz): |
| Software | Multiple BSSID: Supports up to 8 BSSIDs per radio SSID-to-VLAN Tagging: Supports 802.1q SSID-to-VLAN tagging Spanning Tree: Supports 802.1d Spanning Tree Protocol VPN: Pass-through (PPTP, L2TP, IPSec) WPS: Software only |
| Topology | Infrastructure/Ad-Hoc |
| Operation Modes | Access Point, Client Bridge, WDS Bridge, WDS Access Point, WDS Station, Universal Repeater, Access Point Router, Client Router |
| LAN | IP (check validity and DHCP server IP range) |
| DHCP Server | DHCP range, lease time, client list |
| Wireless | Wireless Mode: 11b/11g/11n Channel selection (settings vary by country) Channel Bandwidth (Auto, 20 MHz, 40 MHz) Transmission Rate: For 2.4 GHz, 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only |
| QoS | WMM (Wireless Multimedia) |
| Power Control | Transmitter: Adjust transmit power by dBm |
| Configuration | Web-based configuration (http)/Telnet |
| Telnet Server | CLI |
| Firmware Upgrade | Via Web browser, settings are reserved after upgrade |
| Setting | Administrator: Administrator Username and Password Change Reset: Reboot (press 1 second); reset to factory default (press 10 seconds) |
| System Monitoring | Status statistic and event log |
| Management | SNMP: V1, V2c MIB: MIB I, MIB II (RFC1213) and private MIB Traffic Measurement: Per interface Auto-channel Selection: Automatically selecting least congested channel Bandwidth Measurement: IP range and bandwidth management Backup and Restore: Save and restore settings through Web interface Diagnosis: IP pinging statistics |
| Wireless / Network | PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode (this function will keep trying when failed or disconnected) PPTP: Point-to-Point Tunneling Protocol is a method for implementing virtual private networks |
| Wireless Security | WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) 802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP SSID broadcast enable/disable MAC address filtering, up to 50 field L2 Isolation (access point mode) Wireless STA (client) connected list (idle/connection time, Pkt statistics) |
| Temperature Range | Operating: 32 to 122°F (0 to 50°C) Storage: -4 to 140°F (-20 to 60°C) |
| Humidity | Operating: 90% or less (non-condensing) Storage: 90% or less (non-condensing) |
| Dimensions (L x W x H) | 5.32 x 4.14 x 1.18" (135.13 x 105.16 x 29.97 mm) |
| Weight | 0.77 lb (0.35 kg) |
Packaging Info
| Package Weight | 1.55 lb |
| Box Dimensions (LxWxH) | 12.2 x 9.2 x 3" |
no download
Reviews
There are no reviews yet.