BDCOM SWITCH S2226-I

BDCOM SWITCH S2226-I

BDCOM S2200I Series switches are new generation smart access ones developed by Shanghai Baud Data Communication Co., Ltd for carrier’s IP MAN and enterprise networks. S2200I, based on new-generation high-performance hardware and the BDROS platform, supports functions such as powerful ACL, QinQ, 1:1 or N:1 VLAN switching, Ethernet OAM and carrier-level QoS. Various management modes, flexible installation modes, lightning protection, low-consumption and being fan-free of this switch series meet the multi-service bearing requirements and the access requirements of all complicated applications.

 

Categories: ,
  • Description
  • Reviews (0)
  • Specification

Description

BDCOM S2200I Series switches are new generation smart access ones developed by Shanghai Baud Data Communication Co., Ltd for carrier’s IP MAN and enterprise networks. S2200I, based on new-generation high-performance hardware and the BDROS platform, supports functions such as powerful ACL, QinQ, 1:1 or N:1 VLAN switching, Ethernet OAM and carrier-level QoS. Various management modes, flexible installation modes, lightning protection, low-consumption and being fan-free of this switch series meet the multi-service bearing requirements and the access requirements of all complicated applications.

 

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.

Technical parameters

 

 

Total swap capability8.8Gbps
Total packet forwarding ratio6.6Mpps
MAC volume16K
Description of service ports24 10/100Base-T ports and 2 gigabit Combo ports (10/100/1000Base-T or 100/1000Base-X)
Dimensions  (unit: mm) (W*H*D)310×162×44
Power consumption<20W
Power supplyAC 100V-240V 50Hz±10%

DC -36V~-72V

Environment requirementsWorking temperature and humidity: 0℃-50℃, 10%-90% non-condensing

Storage temperature and humidity: -20℃-70℃, 5%-95% non-condensing

MAC exchangeStatic configuration and dynamic MAC learning

MAC browsing and removal

Configurable aging time of the MAC address

Limited number of learnable MAC addresses

MAC filtration

Black-hole MAC list

VLAN4K VLAN list

GVRP

1:1 VLAN mapping and N:1 VLAN mapping

Supporting QinQ

PVLAN

STP802.1D (STP), 802.1W (RSTP) and 802.1S (MSTP)

BPDU protection, root protection, and loopback protection

MulticastIGMP v1/v2/v3

IGMP snooping

IGMP Fast Leave

Multicast group strategy and multicast group quantity limitation

Multicast flow copying over VLANs

IPv6ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet

IPv6 neighbor discovery

Path MTU discovery

MLD V1/V2

IGMP snooping

QoSFlow classification based on each field in the heads of L2/L3/L4 protocols

CAR flow limit

802.1P/DSCP priority re-labeling

SP, WRR, and “SP+WRR”

Congestion avoidance mechanisms like Tail-Drop and WRED

Flow monitoring and flow shaping

Security featuresL2/L3/L4 ACL flow identification and filtration

DDoS attack prevention, TCP’s SYN Flood attack prevention, UDP Flood attack prevention, etc

Limitation of broadcast/multicast/unknown unicast packets

Port isolation

Port security, and “IP+MAC+port” binding

DHCP snooping and DHCP option 82

IEEE 802.1x authentication

Radius BDTacacs+ authentication

Level-based command line protection

ReliabilityStatic/LACP link aggregation, and link aggregation over service cards

EAPS and ERPS

ISSU uninterrupted system upgrade

Management and maintenanceConsole, Telnet, SSH 2.0

Browse-based WEB management mode

SNMP v1/v2/v3

TFTP-patterned file upload/download management

RMON event record