BDCOM GPON GP3600-08
₦641,160.00
BDCOM GP3600 complies with ITU-T G.984/G.988 and meets requirements about GPON OLT inNetwork Access Technical Requirements. It fully supports CTC2.0, automatic discovery and cooperation with ONUs of different manufacturers.
BDCOM GP3600 supports the Asymmetric uplink 1.25Gbps/downlink 2.5Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users.
Its coupling ratio ups to 1:128, and its support of different hybrid ONU networks minimize the carrier’s investment.
BDCOM GP3600, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.
- GPON: Abiding by ITU-T G.984/G.988, BDCOM GP3600 series OLTmeets relevant requirements of GPON OLT regulated in Network Access Technical Requirementsand China Telecom GPON Technical Requirements-CTC2.0;
- SystemCapacity: GP3600 series supports maximum 16 GPON ports.
- Uplink Interface: GP3600 series with 4 gigabit SFP ports, 4 gigabit combo ports, and 4 10G SFP+ ports.
- Dimensions: 1U, occupies a small space.
- Environmental Protection: low power consumption and low operating cost.
- Bus Optical Fiber Protection: the link can be automatically switched when trouble occurs in the optical fiber;
- Power Characteristics: supports dual-AC, dual-DC and AC/DC power supply. The power supply supports modularized design, hot-swap and EMC-3 standard. It well adapts to the environment.
- Description
- Reviews (0)
- Specification
Description
BDCOM GP3600 complies with ITU-T G.984/G.988 and meets requirements about GPON OLT inNetwork Access Technical Requirements. It fully supports CTC2.0, automatic discovery and cooperation with ONUs of different manufacturers.
BDCOM GP3600 supports the Asymmetric uplink 1.25Gbps/downlink 2.5Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users.
Its coupling ratio ups to 1:128, and its support of different hybrid ONU networks minimize the carrier’s investment.
BDCOM GP3600, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.
Only logged in customers who have purchased this product may leave a review.
Technical Parameters
| Attributes | GP3600-08 | ||
| System Capacity | Maximum coupling ratio:1:128
Backplane bandwidth:205G MAC table capacity: 64K |
||
| Interface | PON | 8 | |
| Uplink interface | 4 gigabit SFP slots, 4 gigabit TX/SFP combo ports | ||
| 4 10G SFP+ slots | |||
| Attributes of the PON Interface | The transmission rate with downlink 2.5Gbps/uplink 1.25Gbps
Class B+ and Class C+ GPON module Security: ONU authentication mechanism |
||
| Standards | ITU-T G.984/G.988
IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP IEEE 802.3ad physical link static/dynamic aggregation (LACP) Ethernet – II |
||
| QoS | Backpressure flow control (half duplex)
IEEE 802.3x flow control (full duplex) IEEE 802.1p, CoS WRR, SP and FIFO queue schedule Limiting the uplink/downlink rate based on each ONU DBA and SLA |
||
| VLAN | Port-based VLAN
QinQ and flexible QinQ |
||
| Multicast | L2 multicast
IGMP Snooping MLD Snooping |
||
| Layer-3 routing functions | Static routing, RIP and OSFP,OSFP/OSPFv3 | ||
| Reliability | Unidirectional Link Detection (UDLD)
Hot swap of the GPON optical module Optical path protection of GPON (type B/C, hand-in-hand) Abnormal luminescence ONU detection such as long luminescence |
||
| Network Security | Limiting the maximum number of users on each port
Port isolation Packet storm control Flow-based ACL access control function Transmission data encryption on the PON interface |
||
| Configuration Management | Various management modes such as CLI, SNMP and telnet
Conducting software upgrade through TFTP/FTP Debug output |
||
| Physical Characteristics | Dimensions mm (W×D×H): 442.5x304x 44 | ||
| Installation: standard 19-inch rack-mount | |||
| Weight:5.25Kg | |||
| Environment | Operating environment: 0℃-45℃; 10%-85% non-condensation | ||
| Storage environment: -40℃-80℃; 5%-95% non-condensation | |||
| Power supply | Input voltage: AC90～240V, DC 36 ~ 72V
dual-power input, DC/AC power supply and hot-swap |
||
Reviews
There are no reviews yet.